Uneven Electrode Wear

Solution

Feedback has shown that a few customers have experienced uneven wear of the copper/silver electrodes possibly due to plumbing configuration or flow rates.

If you find that one electrode is smaller than the other simply remove the electrode assembly from the cell housing, rotate it 180 degrees and replace. Doing this once every 4 - 5 months should even up the wear and ensure maximum electrode life. 

 
Was this article helpful? yes / no

Article details

Article ID: 39

Category: Knowledgebase

Date added: 17-01-2017 04:37:43

Views : 744

Rating (Votes): Article rated 3.6/5.0 (41)

 

 
Powered by Help Desk Software HESK, brought to you by SysAid